Product Specifications

Upgrade your kitchen and bathroom cabinets with 105° soft close face frame cabinet hinges designed for 1/2" overlay cabinet doors. These concealed hinges are made for American-style face frame cabinets and combine soft-close operation with 3-way adjustment for smooth closing and precise door alignment.

Featuring a 105° opening angle, 35 mm hinge cup, 45 mm mounting hole spacing, and 1/2" overlay configuration, these hinges are designed for cabinet replacement, renovation, and new installation projects.

Designed for 1/2" Overlay Face Frame Cabinets

These 1/2" overlay cabinet hinges are designed for American-style face frame cabinets where the cabinet door overlaps approximately 1/2 inch of the front face frame when closed.

The overlay measurement refers to the amount of the cabinet door that extends over the front wooden face frame. It does not refer to the thickness of the cabinet side panel.

Important: Measure your existing door overlay before purchasing to confirm compatibility.

105° Opening Angle

The 105° opening angle provides practical access to the cabinet interior while helping maintain clearance from nearby cabinets and doors.

This makes these hinges suitable for everyday kitchen and bathroom cabinet applications where controlled movement and reliable operation are important.

Soft Close for Quiet Cabinet Doors

The integrated soft-close mechanism slows the cabinet door during the final stage of closing, helping prevent slamming and reduce operating noise.

The damping system provides a smoother closing motion and helps reduce repeated impact on the cabinet door and hinge during everyday use.

3-Way Adjustable for Precise Door Alignment

The built-in 3-way adjustment structure allows you to fine-tune the cabinet door after installation.

Adjustments can be made in three directions:

• Vertical adjustment — Raise or lower the door for proper positioning.
• Lateral adjustment — Adjust the side-to-side position and maintain consistent door gaps.
• Depth adjustment — Move the door closer to or farther from the cabinet frame.

These adjustments make it easier to achieve proper alignment and consistent spacing when installing or replacing face frame cabinet hinges.

Upgraded 2-Hole Mounting Base

The upgraded 2-hole mounting base provides a secure connection between the hinge and cabinet frame.

The additional mounting point helps improve installation stability and provides reliable support during repeated cabinet door operation.

Durable Cold-Rolled Steel Construction

Made from cold-rolled steel, these soft-close cabinet hinges are designed for repeated opening and closing.

The hinges feature a double-electroplated finish, consisting of a protective brass undercoat and nickel-plated outer surface. This layered finish helps improve resistance to rust, corrosion, and everyday wear.

The durable construction makes these hinges suitable for kitchen and bathroom environments where cabinet hardware may be exposed to moisture and humidity.

Standard 35mm Hinge Cup

These concealed cabinet hinges feature a 35 mm (1.4") hinge cup diameter and 45 mm (1.77") mounting hole spacing.

Before purchasing, compare the existing hinge cup, mounting configuration, door overlay, and cabinet construction to ensure compatibility.

Key measurements:

• Door overlay: 1/2"
• Hinge cup diameter: 35 mm (1.4")
• Mounting hole spacing: 45 mm (1.77")
• Opening angle: 105°
• Cabinet type: Face frame

How to Measure a 1/2" Overlay

Accurate overlay measurement is important when replacing face frame cabinet hinges.

1. Close the cabinet door.
2. Measure how far the door extends over the front wooden face frame.
3. The measurement should be approximately 1/2 inch for this hinge configuration.
4. Do not measure the thickness of the cabinet side panel.

If your cabinet door overlaps the face frame by approximately 1/2", this hinge is designed for that overlay configuration.

Easy Cabinet Hinge Installation

These 105° soft close face frame cabinet hinges are designed for straightforward installation and adjustment.

Matching self-tapping screws and dowels are included. After securing the hinge, use the 3-way adjustment mechanism to fine-tune the door position and achieve the desired alignment and cabinet door gaps.

For replacement projects, we recommend comparing your existing hinge configuration and measuring the door overlay before ordering.

Why Choose These 1/2" Overlay Cabinet Hinges?

• 1/2" overlay design — Made for compatible American-style face frame cabinets
• 105° opening angle — Provides practical access to cabinet storage
• Soft-close mechanism — Helps prevent slamming and reduce closing noise
• 3-way adjustable — Allows vertical, lateral, and depth adjustments
• 2-hole mounting base — Provides secure and stable installation
• 35mm hinge cup — Designed for standard concealed hinge installation
• Cold-rolled steel construction — Built for repeated everyday use
• Double-electroplated finish — Brass undercoat with nickel-plated surface for added corrosion resistance
• Installation hardware included — Includes matching self-tapping screws and dowels